Description
The RSG esCAPe is recommended to protect respiratory organs from dust, gases and vapours, which may be given off in the event of fire. In particular, the filter is able to protect against carbon monoxide (CO) for concentrations up to 10,000 ppm, Acrolein, HCl, HCN, and from class P2 dusts.
All materials are heat and flame resistant, and grant the device a high impact resistance. Sèkur esCAPe is an escape device equipped with a mouthpiece and a nose clip, that allow a high degree isolation of the wearer in a contaminated environment.
• This device is for a single use only.
• The duration of respirator RSG esCAPe is 15 minutes.
Certifications:
Approved in accordance with EN 403:2005. Certified according to European Regulation 2016/425.
DONNING AND USING:
To properly use and donning of the device, perform the following operations:
Open the package pulling out the adhesive tape and put out the anti moisture bag and open it using the pilot cutting.
Pull out the envelope that protects the device from moisture and open it using the notch provided,
Put out the device, bite the mouthpiece and wear the clip nose.
Subsequently don the hood and tighten the elastic rope up to obtain a good seal around the neck.
1 RSG esCAPe: Without hanging clip type S Code 500300
2 RSG esCAPe: With single anchor on the wall Type S Code 500301
3 RSG esCAPe: With triple anchor on the wall Type S Code 500302
4 Accessory Hanging clip Code 500290
5 Accessory Single anchor on the wall Code 500280
6 Accessory Triple anchor on the wall Code 500270
